Does anyone know how to stop my system alarming due to “motion” instead of only when a human is detected? Onky 1 camera has this problem.
This has happened a couple of times due to cats in front yard but it doesnt always happen when they are there, it also never happens on any other camera.
All settings are the same for each camera outside, motion toggle on (if this toggle is off it turns off all detection) Detection type Check Box for “human detection” is the only check box thats on. (Pet, vehicle, and all other are not checked).
Sensitivity is only 3 for minimum required to work. Activity area limits are reduced to smallest possible to still work.
System has Homebase 3, 2x sirens, 6x door alarms, 1x e340 double camera, 2x S330 cameras, 1x s360 camera, 1x floodlight camera (360 dual cam), and
The camera alarming on motion is 1x s340 solocam.
All devices are connected to the homebase. Only this camera has the problem.
Firmware up to date.
Other cameras will turn there own lights on when a cat walks past but ignores it as a human wasnt detected and turns back off without notification or alarm, which is correct.
Only automation setup is to start multiple cameras recording when a human is detected.
Alarms are activited by “mode” setting.