Hi I have bought a corner bracket to add my S340 to the back of my house. However where the solar Panel needs to sit, I need a corner bracket that would face the opposite way to the way the existing one does. The picture shown is how I would need the camera to be located and the exact view it needs. I can’t see how the normal bracket does that as it faces forward and the corner bracket faces the opposite way. Is there a normal way or an additional bracket that could do that 
Please can you help and advise how I could set up for this requirement.
Probably buy another corner bracket and use one for the camera and one for the solar panel. Run the cable between. That way each can face different directions as they are independent
Another option could be to use a universal adjustable camera mount (or a 1/4”-20 adapter) between the corner bracket and the S340. That gives you much more freedom to rotate the camera into the exact position you need, while leaving the solar panel in its optimal direction.
If you want to keep the original eufy mounting hardware only, then using two corner brackets (one for the camera and one for the solar panel) is probably the easiest solution, as already suggested.
It would be great if eufy offered a reversible corner bracket or a more adjustable mounting plate, as I imagine other users will run into the same issue.
I used a peace of pvc trim board to extend it out away from the house (or in my case the shed) this gives it more visibility and better rotation ability and put the solar panel on top. Mine is mounted under a soffit but if yours is on a lower corner without the soffit just make a 3 sided box and secure it on the side of building
