Eufy S1 Pro Mopping Problem

eufy Ask Community
, , ,
1

Every time my robovac mops my kitchen/dining room floor (dark grey polished porcelain tiles) it is leaving a film with lots of marks. The floor looks horrible and then needs to wiped down with a cloth. Kind of defeats the purpose of having a robovac to do it?

As my wife pointed out - it might have cleaned but it leaves the floor looking worse.

I’ve tried everything Eufy have suggested and they have even sent me a replacement unit. But the mopping is still really bad on my tiles?

I have found some reports of this on reddit but thought I would check here to see who else has the same problem.

10 Likes
4

I’ve run mine exactly three times on our tiled downstairs. The first time was great at first except toward the end it started streaking. I read on Reddit that the roller mop does not actually self clean and I needed to clean the roller mop manually (wash it off and towel dry) in between rooms. The third time I ran it, it missed major spots in my tiled kitchen and bathroom. Going to have to call tomorrow.

1 Like
5

I was thinking that you might have to manually clean the mopping heads every couple of times. Especially if the floor was really dirty to start with.

1 Like
6

Here are my tips but see what works best for you.

Firstly make sure you clean out the water waste in the robot at least once a week. Cleaning the roller every few weeks is fine.

Mopping on tiles - use low or mid water setting and remove the spinning brushes (they leave marks).

Clean the floor weekly with a floor cleaning mop (flash or something like that). On shiny tiles the eufy mop really struggles with foot residue.

Hope that helps.

1 Like
7

Destillate water or Dion ist water osmosewater

1 Like