How does the eufyCam with the external antenna look?

Dear eufy fans,

We are considering the design of a new generation of eufyCam in the form of an external antenna to increase the Wi-Fi connection range, probably can reach a distance of about 1000ft.

Assuming that the ID design is shown in the following figure, we are worried that the external antenna may damage the aesthetic feeling of the original design.

Figure 1: External antenna design

Figure 2: Built-in antenna design

So, what about your opinion? Need your voice on this point. Come on, Letā€™s talk it!:sunglasses:

Note: The discussion can involve but not limited to the following topic.
1ļ¼‰How do you feel about this design?
2ļ¼‰Can you accept the design of the external antennaļ¼Ÿ
3ļ¼‰Your suggestions and ideas.

4 Likes

I would not mind the appearance of the antennas if the distance works. Access would trump appearance.

1 Like

First of all, appreciate your efforts and coming with an idea to have external antenna.
As the limited wireless range is a huge drawback on these great eufycam series, adding external camera may improve the signal range and satisfy many more customers.

  1. How about provide an option to attach the antenna if the user is experiencing signal issues only, as an option to plug the antenna if the signal is weaker.
  2. how about adding antenna element molded into the casing body (like the iphone antenna ring) to increase the coverage area?

Just my 2 cents :man_shrugging:

I personally think the antennae look fine. This is a security system, and ultimately what matters the very most is that it works and the signal is strong. These two little ā€œearsā€ are a very small price to pay, and look just fine.

As for the suggestion about an attachable optional antenna, I only worry about two things there:

  1. You get people who mount them without the antenna thinking their signal will be okay but are wrong, and then misplace the pieces and when they need them, they are gone.

  2. Thereā€™s a point of entry there so that moisture may corrode the point of attachment.

Iā€™d say just stick them on there, and if someone doesnā€™t like them being up, just keep them folded down. No one is going to really notice or say anything negative about it as they are fine, well-designed cameras already.

1 Like

I like your points @JoeyY. to me, nothing wrong to have 2 extra ears

1 Like

I really like the antenna! I think it looks better with it than without it! If you are making this camera have a big range you need a solar panel compatible with this camera and all other cameras you make so you can have even more freedom with where you place it. Also maybe Instead you could use 4g data and combine it with the solar panel then you could put it anywhere and never have to worry about it. What do you think @ken17?

1 Like

I like the look and if it gets 1000ft range bring it on I will stick these all over just because I can :v:t2:

I would not mind an external antenna if it meant that I would get better range but I would prefer the antenna to be inside the camera. I definitely donā€™t mind an external one if it means that The camera can connect to the home base 100 ft further away.

Probably a bit late to this discussion, but the problem I see with such big ā€˜earsā€™ is that in some mounts they may hit wall or ceiling above the unit. Now, you may say that the ā€˜earsā€™ can be moved, but how would that affect the range?

It think the cameraā€™s look cute with those ears :rofl: but seriously, if it works I donā€™t care how it looks

2 Likes

I think it looks good and is a good idea!!

External antenna = great idea!
Once the camera is mounted, I donā€™t pay attention to it that much unless there is problem. Cosmetic appearance vs increase in range, I would pick range increase without hesitation.

2 Likes

I agree with both of JoeYā€™s points.

But, I think more time needs to be put in allow the camera to join an existing Wifi network to connect back to the base.

Iā€™ve been using an external antenna for about a year

Pre mod it dropped out at the purple dot, post mod it dropped out at the red dot (a lot further & a lot more obstacles)

My only thought is, will they be the same design antenna as the internal?
As flat antenna are they going to be affected by the camera orientation to the homebase?
Are they going to have any dB gain compared to the internal?

I havenā€™t tested the original but Iā€™d guess 1-1.5db
The external I chose is a 5db
Having the same just away from the PCB probably wonā€™t make much difference, less noise but more losses
I estimate about 0.6db loss for the cable & sma connector but that still means I would have about 3db gain over the original

Better choice than adding additional homebases though as I also have 2 home based one modded one standard


With the combination of camera & homebase modded my furthest camera actually has the best signal, camera with the worst is the 2nd closest (I have 4 cams, 2 per Hb)

4 Likes

Yeah like the idea and looks of the external antennas. I assume you are also considering adding something similar to the home base.

Iā€™d love if there was an exposable, behind a rubber door/flap or such to prevent ingress, RP-SMA where we could attach an antenna of choice.

1 Like

Would you be able to do just one antennae? Either way getting that sort of range far outweighs the negative aesthetic.

Nice job @Haloweenhamster, could you share how you added the antannas? I donā€™t need extra range but if I ever did then this would be great. Other people may want to do it too :+1:t5:

The homebase is the easiest & what Iā€™d recommend



Disassemble, desolder 2 antennas, solder on 2 rp-sma cables, drill holes for the sma connector to go through

Camera, not recommended



Disassemble, remove pins for WiFi printed antenna, solder on rp-sma cable (careful not to put any strain on the solder joints, I accidentally took ground pad off when I moved the cable hence why itā€™s soldered to the screen), cut magnet on back of case, drill hole for sma

Note
A year after doing this mod the camera failed to charge (3rd charge), disassembled & found water got into the antenna, through the centre of the sma, down the cable & onto the camera PCB, the result was the charging circuit has failed so Iā€™m in the process at the moment of adding a cable directly to the battery to be able to charge it, luckily camera still functions fine

2 Likes

I prefer the figure 2 design ā€¦itā€™s a much cleaner look. I think those external WiFi antennae might be a problem in winter up here in Canada ā€¦ might freeze and break off or become damaged by ice and weather