Hi, Just wondering if there is a way for the night vision to work through glass so the camera will be able to look outside from the inside. During the day is fine, but when night vision is on in it reflects off the glass so can’t see a thing. Any tricks that’ll make it work?
Turn off auto night vision. I used my pan tilt in the window as I was testing to see if I wanted to buy the C24 outdoor wired cam as it runs the same software. You will need good outside lighting and really reduce indoor lighting that reflects off the window also. Works but a horrible experience if you wanted this as a permanent solution.
With IR/night vision off, You need a black box to cover the unit stopping reflections from inside.
Bigger box can minimize light pipe effect from glass window.