Hi,
I’ve only ever set up one camera at the front door and use ‘Home’ mode but will probably set up the second camera this week end to cover the rear of the house.
Just curios if anyone has any recommendation on how to set up the configurations? e.g. do you you use the Automation feature, is it best to just have both cameras o the ‘Home’ setting or have you created something custom
You can use the automations feature to set all camera alarms off if the Homebase alarm is triggered. In this way you will draw the most attention to your house in event of a break in.
2 Likes
Agreed! This is one of the best features, setting up the homebase to alarm the cameras when it’s triggered. Especially, if you add the “anti-theft” feature. I would also suggest to add the “alarm” on each camera at night (depending parameters) or when you’re away from home. The alarms only trigger when there’s motion and turn off when the motion stops. Meaning the alarm will not just continue to ring non-stop or have to be turned off manually. It’ll alert you, but will individually stop on its own, which is awesome!
2 Likes