Eufy Omni E25 (T2353) – error when station tries to add water. Where to look inside?

Hi all,

I’m looking for help fixing a secondhand Eufy Omni E25 (UK). Eufy support says it’s “a hardware malfunction” but won’t say which part, so I’m happy to repair it myself if I can find the fault.

Symptoms

•	Vacuum-only cleaning works fine. The robot docks, charges and empties normally.
•	On a mop cycle, it docks and washes the mop. Then, when the station tries to add water to the robot, I get: "There is a communication error between the robot and the station."
•	Turning the robot off and on clears it until the next cycle.
•	Once I also got "Unable to drain dirty water" before the usual error.
•	The robot's wheels keep spinning on the spot when it's seated in the dock.

Already tried

•	Cleaned the charging contacts and infrared lenses.
•	Fitted a new mop, filter and rollers.
•	Cleaned the robot's water tank.
•	Reseated the tanks and cleaning tray, and power cycled the station.
•	Checked the station is on a hard, level floor.

My questions

1.	Has anyone had this on an E25, E28 or similar Omni station? What fixed it?
2.	Does anyone have a teardown or service guide? Where are the water-fill pump, valve and robot inlet port?
3.	What are the usual failure points? Seals, check valves, pump, flow sensor, blocked tubing?
4.	Where can I buy spare parts in the UK?
5.	Is there a way to test the pump or valve directly?

I’m comfortable taking it apart and can post photos or a video of the fault. Thanks for any pointers!

Hi, it’s cool that you want to try to fix it yourself.
Maybe you can find a teardown / disassembly video on YouTube for the Omni E25 or possibly similar symptoms.