I am having the same issue. Cameras stream fine. Homebase recorded video clips just fine for a few weeks. Then notifications and motion detection recordings stopped 4 days ago. Those older clips are still available. Homebase shows no used space on 1TB ssd despite several weeks of recorded clips.
Had the same HomeBase issue past 2 days. When I disconnected the power source to HomeBase, waited a few minutes then reconnected power source all videos previously not seen came back. Definitely an issue with the firmware in HomeBase. It was updated last week and since then there was this issue.
On 8/5/23 received System update:
1 - Optimized the AI detection and motion detection.
2 - Optimized the video recording. (This may be the problem)
3 - Optimized the audio recording of HomeBase.
4 - Improved the system stability and smoothness by fixing bugs.
I too I am experiencing this exact problem with S380 Homebase3 for the first time for the past 3-4 days. I have my HB3 on Sysversion 3.4.4.9 and Subversion 1.4.0.8 with firmware having on Feb 3rd.
I know that I was receiving motion detection just fine in February so it is not clear if it’s the new firmware or something else.
I do have lots of cameras associated with the HB3 though. I mean a lot (1 x 4G LTE Cam S330, 4 x Solo Cam S340, 1 x Video Doorbell E340, 3 x S330 eufyCam). Rebooting the HB3 helps to bring motion detection back but the same issue reoccurs after 1-2 hours. Something is definitely not working. In all the years I have had eufy devices, I never experienced this before, and this is quite annoying if I cannot rely on motion detection. I know the cameras do perform motion detection because I see the red light is activated when there is motion and AI tracking on the SoloCam do follow me. Live view works fine.
A few days ago I had several events during the day without any detection/notification.
The system was on. Internet connection was stable. But the cameras did not catch any of it. There was no recording done either.
@Eufy > SOLVE THIS !! IT worked great with my HN2, I have spend a lot of extra money for the HB3 nd now this … it’s happening ever since November … all updates are applied. Individual cams are okay, but the HB is a nightmare.
Things had been better last month (not sure what they had done) with motion detection and recording working fine. However, my HB3 received an update on 5/11 that has since broke motion detection recording and notification entirely. Now, not even a reboot of the HB3 is allowing it to work temporarily. I was hoping Eufy was aware of this and would have fixed it after a week. I am patient guy and understand that sometimes software can break and bring issues but this is really bad that even after 7 days, nothing has been done to remedy the problem, nor are there anywhere on the website reporting this as a known issue that someone is working on. Am I really the only one with the issue?
It is quite comical that the release notes associated with the update on 5/11 would advertise “Improve the base station’s notification feature” but instead broke it entirely. Seriously, what is going on?
