Switched to HB S380 and many things are wrong. HB 1 worked fine

Since switching to Homebase 3 last week I’m getting erratic behavior in my ecosystem. Everything worked with Homebase 1 pretty well up to now (with some sluggishness developing recently), even though I had to select things separately because of newer cameras. All of them are able to be viewed in the app and are set up as they should be. All settings have been triple checked and are as they should be. All cameras are fully charged. All firmware up to date.

My new S220 SoloCam notifies in Home mode, but not Away.

One of my original eufyCams works perfectly and the other does not notify in Away mode, but does in Home mode, though the white status light flashes in Away and it appears to be recording. That video recording does not show up in my notifications because it is not notifying.

My eufyCam E does not pick up motion or notify at all, nor does it pass the motion detection test. I removed and synched it again with no change in behavior.

My Indoor Cam Pan & Tilt will not connect to the S380 at all.

My entry sensors work as expected.

If I’m going to have to climb up ladders and take down and reinstall cameras just to try and debug this thing, I’m wondering if I should reinstall the original HomeBase 1 that was working and return the HomeBase 3 instead. I’ve already spent many hours trying to figure this out.